9. April 2026
Bjelland: Depot Charging for Heavy Transport with Idunn 80
#Articles #Fast charging #Idunn #Solutions

Bjelland: Depot charging for heavy transport with Idunn 80
Kverneland Energi has delivered two Idunn 80 depot chargers to the contractor Bjelland AS at Klepp for overnight charging of a fleet of heavy electric construction machines. The solution utilizes nighttime hours for smart power distribution, ensuring the machinery fleet is 100% charged by 07:00 without triggering costly peak power demand charges in grid tariffs. Each Idunn 80 features dual charging points, delivering 80 kW to a single machine or 40 kW to two machines simultaneously.
Fact Box
| Key Figures | Value |
|---|---|
| Facility type | Depot charging for heavy transport and construction machinery |
| Client | Bjelland AS |
| Location | Klepp, Norway |
| Equipment | 2 × Idunn 80 (Kverneland Energi) |
| Total charging capacity | 160 kW distributed across 4 charging points |
| Charging profile | 80 kW per charger for one machine, or 40 kW × 2 during parallel charging |
| Functionality | Depot charging, dynamic power distribution, peak shaving |
| Completed | 2026 |
The Challenge: Matching Charging Speed with Usage Patterns
For a contractor like Bjelland, uptime is critical. Electrifying heavy transport requires tailored solutions: while Kverneland Energi's Thor fast chargers are the obvious choice for vehicles in continuous operation needing massive power in a short time (high-power charging), Bjelland had a different need. The machines remain parked overnight. The challenge was to utilize these hours optimally—charging the batteries without creating unnecessary and costly power peaks on the electrical grid.
Bjelland needed a solution that was robust enough for industrial use and harsh climates, space-efficient with capacity for two machines per charger, and intelligent enough to distribute power efficiently throughout the night without manual intervention.
The Solution: Idunn 80 Depot Charger
The choice fell on two Idunn 80 units from Kverneland Energi—chargers developed specifically for depot charging, where machinery remains stationary for extended periods.
“Electrifying a heavy machinery fleet is about more than just hardware; it is energy logistics. With Idunn 80, we provide the customer with a tool that leverages nighttime hours for smart power distribution. The result is 100% uptime when the workday starts, without provoking costly power peaks on the grid.” — Jonas Kverneland, CTO at Kverneland Energi
How Does the Dual Charging Point Work?
Each Idunn 80 is equipped with dual charging points, providing operational flexibility through dynamic power distribution. If only one machine is charging, it receives the full 80 kW output. If two machines are plugged in, the power is split to 40 kW per machine—more than enough to fully recharge the batteries during a rest period.
The Result: Reduced Risk and Complete Control
By installing Idunn 80, Bjelland has achieved a seamless transition between the workday and the charging cycle.
The machinery fleet is always 100% ready at 07:00. By tailoring the charging speed to the machines' dwell time, Bjelland avoids sharp power peaks in grid tariffs (peak shaving), ensuring highly cost-effective operation for equipment parked overnight. And because the hardware is developed and manufactured by Kverneland Energi in Jæren, expert support is always close at hand.
Related Technical Articles
- Dynamic Load Balancing
- What Is Peak Shaving?
- High-Power Charging (HPC)
- Product Page: Idunn and Idunn 80 (Chargers)
- Product Page: Thor
- Full Specifications (Datasheet)
Does your machinery fleet require an industrial charging strategy? Kverneland Energi assumes turnkey responsibility—from engineering and capacity calculation to complete system installation. Contact us for a technical review.